【39300】
Jig for welding rubber tires

For various 1/10 touring car tires and RIDE 60 size tires for M-Chassis.
Pouch and 2 spot nozzles.
Includes pouch and 2 spot nozzles.

【39100】
Air Remover Short (with Pouch)

It is a vacuum tank that removes air bubbles from the dampening oil within seconds.
Includes a storage pouch for easy transportation.

【39101】Air remover long (with pouch)

It is a vacuum tank that removes air bubbles from the dampening oil within seconds.
Includes a storage pouch for easy transportation.
Correction long version only:
The 29101 long version can be used for longer shocks (1/10 – 1/8 Buggy/Truggy)

【39023】
1/10 Rubber Tire Adhesive Jig
for Touring

This jig is useful for bonding and repairing rubber tires for 1/10 touring cars.
It can be used to cleanly bond tires and wheels using instant adhesive.

【38100】
Body pin with wire (S) Blue

Body pin to fix R/C body and chassis.
Body scratch prevention and gap adjustment pads 4 pads　
2 body pins with wire shorts

【38101】
Body pin with wire (L) Red

Body pin to fix R/C body and chassis.
Body scratch prevention and gap adjustment pads 4 pads　
2 long body pins with wires

【38102】
Sponge pad (Red)
Pads to protect the RC body (body scratch prevention, gap adjustment)
10 pads, 1 set

【38103】
Sponge pad (Blue)
Pads to protect the RC body (body scratch prevention, gap adjustment)
10 pads, 1 set

【38104】
Sponge Pad (Orange)
Pads to protect RC body (prevent body scratches, adjust gap)
10 pads, 1 set

【38105】
Sponge pad
 Double-sided tape (white)
Pads to protect RC body (prevent body scratches, adjust gap)
10 pads, 1 set

【38106】Body protection rubber pad Ф6mm
Rubber pad to protect RC body (body scratch prevention, gap adjustment)
Rubber pad 8 pieces 1 set

【38007】
Body Hole Correction Patch
Patch for correction when drilling body holes
and can also be used to strengthen the area around the body hole.
Can also be used for reinforcement around body holes.
6mm x 8 patches 1 set

【38008】
Body Protection Sponge
This is a cushion sponge to fill the gap between the bumper and the body.
By filling the gap, it reduces damage to the body in the event of a crash.
5mm x 2pcs 2mm x 2pcs 1 set

【37050】
For 1/10 Touring Car DF-Wing Set

1/10 Touring Car high down-force wing.
The profile is inspired by the dragon fly wing aerodynamic properties.
Its cross-section generates high down-force even at low speed range.
Type A for medium to
high speed track. Type B for low to medium speed track.
4 carbon pattern end plates included.

【37012】
 1/10 Touring Car Carbon Pattern Wingtip Plate IFMAR Standard Size
(4pcs) with double-sided tape

1/10 Touring Car Carbon Pattern Wing Plate IFMAR Standard Size (4 pieces) with double sided tape is a wing veneer for wings made of polycarbonate material with carbon-like printing.
The IFMAR wing plate is a wing plate made of polycarbonate material with a carbon-like pattern printed on it.

【38025】
RIDE Decal (for body)
Decal with RIDE logo 1 piece

【39500】
Tire Trays
(with zip packs) 3 each

Tire trays can hold tires up to 65mm in diameter and 26mm in depth.
The trays are stamped to indicate the mounting position when in use.
Tire trays and zip packs (3 each)　

【39032】Spot nozzle for instant adhesives

Glueing nozzle for instant CA glue.
Ideal for clean and neat tire glueing process. 
20 pcs 1 set